Texecom Veritas Excel Master User Manual

Veritas Excel Master User Guide Operating the Alarm System
INS166-2 9
The CHIME Facility
It is possible to set one or more zones to chime when the system is unset. When a zone
is enabled for Chime and Chime is turned on, the control panel will sound a tone
whenever the zone is opened.
To Program the Zones which CHIME
Enter your 4-digit Access code
####
and press
-
, the display will
show the zones that are currently selected for Chime (in this example Zones 1 & 3 are
selected for Chime).
1#/O3$%;,)?$%@".
!"#$0%7:&:::::
12
3
4
56
78
Unset
Tampe r
Zones
! "
To display the descriptive text associated with a particular zone number, press
and hold the corresponding key
#
(LCD keypad only).
Press the number key(s)
#
… of the zone(s) to be selected or deselected. When
completed press
*
to turn Chime on (the control panel will sound the Chime tone) or
press
,
to turn Chime off (the control panel will sound the Error tone).
! "
Once zones have been programmed for Chime, the Chime feature can be turned
on or off by just pressing
-
.
To Turn CHIME On
Press
-
, the Chime tone will sound and the display will look something like this (after
5 seconds the display will revert to normal):
;,)?$%)0%PQ
!"#$0%7:&:::::
12
3
4
56
78
Unset
Tampe r
Zones
To Turn CHIME Off
Press
-
, the Error tone will sound and the display will look something like this (after
5 seconds the display will revert to normal):
;,)?$%)0%P@@
!"#$0%7:&:::::
12
3
4
56
78
Unset
Tampe r
Zones
! "
If no zones have been enabled for Chime, then turning Chime on and off will have
no effect.

Texecom Veritas Excel Master Specifications

General

Brand	Texecom
Model	Veritas Excel Master
Category	Security System
Language	English