Texecom Veritas R8 - Magnetic Contacts and Panic Buttons

Installation
12 INS 034-9
2.4.3 Magnetic Contacts and Panic Buttons
These are connected to one of the eight terminal pairs labelled Z1 to Z8 on the
control panel.
Figure 4 - Wiring Magnetic Contacts
Figure 4a - Wiring a Single Magnetic Contact to a Zone (see also Figure 6)
Figure 4b - Wiring Multiple Magnetic Contacts to a Zone (see also Figure 6)
Mixing powered detectors and magnetic contacts on one zone is easiest if the
wiring is taken from the control panel to the powered detectors first.