Safety - 1 - 2 CD397-Oper
June 2019 (Rev C)
Mobile Belt Loader Model 660-28 Safety
Operation Manual Section 1
15 Hydraulic steering
16 Pilot pressure operated cylinder holding valves
17 Pilot pressure operated reverse belt holding valve
18 All hydraulic hoses rated at 3250 psi (22.41 mPa or 221.15 atm).
19 Hand and/or Guide Rails on either side of the conveyor
20 Non-slip fender surfaces
21 Boot cutouts in rear bumper for safe access to belt as walkaway
22 Bolted down hydraulic tank cover
23 Retracting seat belts
24
Independent expanding shoe and drum park brake on transmission output shaft
or in rear axle. Parking brake applied to rear wheels.
25 Non slip covering on floor board
26 Non slip surface on brake and accelerator pedal
27
Transmission neutral only and park brake applied safety circuit for belt conveyor
movement interlock (Must be in neutral, park brake applied for conveyor to oper-
ate).
TableSafety-1-1:StandardSafetyFeatures/Equipment(Continued)
No. Features/Equipment
Property of American Airlines
To Next Page
Loading...