BHT-206A/B-SERIES-MM-1
5-00-00
Page 22 Rev. 14 30 APR 2013
Export Classification C, ECCN EAR99
4. Examine the following tail rotor hub and blade assembly
attaching components for condition and security:
a. Spacer
b. Rubber bumper
c. Static stop
d. Nut
e. Balance wheel
ZONE 3 — FORWARD DECK
Chapter 11 PLACARDS AND MARKINGS
1. Examine the placards, decals, and markings. Make sure
they are readable, correctly applied, and in agreement with the
applicable configuration of your helicopter.
AIRFRAME (FORWARD DECK)
Chapter 71 1. Remove and examine forward fairing for condition and
security.
2. Examine all fairing and cowling latches and/or fasteners for
condition
3. Examine top deck for condition, leaks, and security.
4. Clean transmission deck.
5. Examine air induction cowling for condition and security,
and plenum for damage, obstructions, and cleanliness.
Examine intake fairing windows for damage and cleanliness.
6. Examine inlet screen, if installed, for missing or damaged
wires and rivets.
7. Examine particle separator, if installed, vortex tubes,
ejector tubes, and ejector nozzles for cleanliness, condition, and
security.
5-16. 100-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 1 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
Need help?
General
