Textron JACOBSEN AR722T - Key Control Switches (Ignition, Brake, Horn)

6 CONTROLS
27
6.2.1 IGNITION SWITCH_________________________________________________________
The ignition switch has three positions, OFF, RUN and START. In the run
position, the controller program is active and input and output circuits are
monitored.
6.2.2 PARKING BRAKE SWITCH__________________________________________________
To engage the parking brake, move the orange lock toward front of mower and press the front of
the switch. Parking brake light on combination gauge (See 6.2.9) will turn on. Operation of the
cutting units operation is disabled with the parking brake engaged.
To disengage parking brake, press the rear part the switch. The parking brake light will turn off.
NOTE: Engine will not start with the parking brake switch in the OFF position.
6.2.3 HORN SWITCH ___________________________________________________________
Press the front of the switch to use the horn.
OFF
RUN
START