To Next PageTo Next Page
Need help?Do you have a question about the Textron JACOBSEN AR722T and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Number of Reels | 7 |
| Transmission Type | Hydrostatic |
| Cutting Height | 0.5 - 2.0 inches (1.27 - 5.08 cm) |
| Speed Range | 0 - 10 mph |
Key operational and safety notes for the mower.
Details of the mower's serial number plate and location.
Space to record mower and engine serial numbers.
Procedures for environmentally responsible disposal of mower parts.
Guidelines for safe operation, including preparation and clothing.
Safe procedures for operating the mower, including slope use and stopping.
Safety measures for ROPS, fuel handling, and maintenance start.
Safety precautions for battery and transporting the mower.
Explains safety alert symbols and interlock system warnings.
Technical details of the mower's engine, including power and torque.
Physical dimensions, overall width, height, and weight of the mower.
Details on battery, brakes, fluid capacities, steering, and hydraulic systems.
Measured vibration levels for hand/arm and whole body exposure.
Slope limits, cutting unit details, and lubricant recommendations.
Information on optional accessories and available manuals.
Manufacturer's statement of compliance with relevant directives and standards.
Explains hazard symbols and warnings related to blades and battery.
Decals warning about hot mufflers and the importance of reading the manual.
Decals for ROPS use, general warnings, and start assist fluid notice.
Decals related to ROPS usage and height of cut adjustment.
Decals explaining traction pedal, patent info, and sound levels.
Diagram showing the location of operator controls.
Diagram of the control panel with numbered components.
Explains the function of ignition, parking brake, and horn switches.
Controls for traction system and wing cutting units.
Explains DPF, engine, and filter warning lights on the module.
Controls for PTO, joystick operation, headlights, and alarm functions.
Controls for engine speed and displays for mower status.
Explains red warning lights for hydraulic, oil, brake, and battery status.
Controls for mower movement, speed, and steering wheel tilt.
Adjustments for seat comfort and wing deck weight transfer.
Pre-operation checks required each day for safety and performance.
Procedures to test the mower's safety interlock system functionality.
Comprehensive guide to safe and correct mower operation.
Step-by-step guide to safely starting and stopping the mower's engine.
Guidelines for driving, transport, and recommended mowing speeds.
Steps for mowing, and safe practices for operating on slopes.
Detailed instructions for safe slope operation, including ROPS use.
Method and chart for calculating slope angles and grades.
Procedures for preparing and towing the mower.
Schedule of required maintenance tasks based on operating hours.
Diagrams of lubrication points and specifications for fluids.
Safety guidelines for maintenance and initial engine care.
Procedures for checking and changing the engine oil and filter.
Instructions for servicing the air filter and safe refueling.
Procedures for draining the water separator and replacing the fuel filter.
Safety precautions and steps for servicing and jump-starting the battery.
Safe procedures for battery charging and exhaust system inspection.
Explains DPF regeneration and hydraulic hose inspection.
Procedures for replacing hydraulic fluid and the oil filter.
Importance of correct tire pressure and tread wear inspection.
Procedures for wheel mounting and radiator maintenance.
Inspecting the ROPS and mower blades for damage.
Procedures and precautions for sharpening mower blades.
General precautions and information about the mower's electrical system.
Guidelines for cleaning the mower and its components.
Instructions for preparing and storing the mower for extended periods.
Safety and general guidelines for performing adjustments.
How to adjust cutting speed and set the neutral position.
Adjusting forward/reverse speeds and the neutral switch.
Steps for calibrating the Traction Control System.
Adjusting wing weight transfer and wing lift arm stop bolts.
Adjusting steering toe-in and steering stop positions.
Procedures for adjusting the cutting height of the mower decks.
Torque values for various bolts and fasteners.
Common problems and their potential causes and solutions.
Explains controller inputs, outputs, and troubleshooting LED indicators.
How to perform a test cut and factors to confirm for accurate results.
Identifies washboarding causes and remedies.
Identifies step cutting causes and remedies.
Identifies scalping causes and remedies.
Identifies straggler causes and remedies.
Identifies streak causes and remedies.
Identifies windrowing causes and remedies.
Identifies causes for mismatched cutting unit appearance.
