Enable or Disable the iSCSI Target Volume.
Target Name Name of the iSCSI Target. This name will be used by the
Stackable NAS function to identify this export share.
iqn_Year Select the current year from the dropdown.
Iqn_Month Select the current month from the dropdown.
Authentication You may choose CHAP authentication or choose None.
Username Enter a username.
Password Enter a password.
Password Confirm Reenter the chosen password
Mutual CHAP With this level of security, the target and the initiator
authenticate each other.
Username Enter a username.
Password Enter a password.
Password Confirm Reenter the chosen password
RAID ID ID of current RAID volume.
LUN Allocation Two modes can be choose from:
Thin-provision：iSCSI thin-provisioning is sharing the
available physical capacity to multiple iSCSI target
volumes creation. And allowed virtual capacity be
assigned in prior then added physical space while it
has run out.
Instant Allocation : Allocate available physical
capacity to iSCSI target volumes.
LUN Name Name of the LUN.
Unused Unused space on current RAID volume.
Allocation Percentage and amount of space allocated to iSCSI volume.
To Next Page
Loading...
Need help?
General
