iSCSI Target
To add iSCSI target volume, click iSCSI with associated RAID volume from its drop
down list to select desired RAID volume.
iSCSI Target
Item Description
Add Click to allocate space to iSCSI target from associated RAID
volume.
Modify Click this to modify the iSCSI Target.
Advanced There are 3 options (iSCSI CRC/Checksum, Max
Connections, Error Recovery Level) is currently allow Admin
to Enable/Disable to operate Thecus IP storage associated
with iSCSI setting.
Delete Click this to delete the iSCSI Target.
Allocating Space for iSCSI Volume
To allocate space for an iSCSI target on the current RAID volume, follow the steps
below:
1. Under the iSCSI Target List, select iSCSI Target then click Add.
The Create iSCSI Volume screen appears.
To Next Page
Loading...
Need help?
General
