System Management
The System menu gives you a wealth of settings that you can use to configure
your N1200’s system administration functions. You can set up system
notifications, view system logs, and even upgrade firmware from this menu.
System Notifications
From the System menu,
choose the Notification item,
and the Notification
Configuration screen
appears. This screen lets you
have the N1200 notify you in
case of any system
malfunction. Press Apply to
confirm all settings. See
following table for a detailed
description of each item.
Notification Configuration
Item Description
Beep Notification Enable or disable the system beeper that beeps when a problem
occurs.
Email Notification Enable or disable email notifications of system problems.
SMTP Server Specifies the hostname/IP address of the SMTP server.
Port Specifies the port to send outgoing notification emails.
Auth Type Select the SMTP Server account authentication type.
SMTP Account ID Set the SMTP Server Email account ID.
Account Password Enter a new password.
Confirm Account
Password
Confirm a new password.
Receiver’s E-mail
Address
Add one or more recipient’s email addresses to receive email
notifications.
Test E-Mail Click to send out a test e-mail to make sure the settings are
correct.
NOTE
To Next Page
Loading...
Need help?
General