Thecus N1200 User Manual

37
Module Management
From the System menu,
choose the Module Mgmt
item and the Module
Management screen appears.
From here, you can install
separate software modules to
extend the functionality of
your N1200.
Module Management
Item Description
Module File Location of the module file.
Browser Click to browse the folder of your PC to locate the module files.
Install Click to install the listed module into your N1200.
Name Displays the name of the module.
Version Displays the module version.
Description The description of the module.
Enable Displays whether the module has been enabled or not.
Uninstall Click to uninstall the module.
Enable Click to enable a module.
Disable Click to disable a module.
Browse Click to browse the folder of your PC to find the module files.
Install Click to install module into your N1200.
Reset to Factory Default Settings
From the System menu, choose the
Factory Default item and the Reset
to Factory Default screen appears.
Press Apply to reset the N1200 to
factory default settings. Press
Cancel to go back to the main menu.
NOTE
As modules are written by third parties and not released by Thecus, Thecus
assumes no responsibility for any damage or loss of data as a result of the use of
modules. USE AT YOUR OWN RISK.
WARNING
Resetting to factory defaults will not erase the data
stored in the hard disks, but WILL revert all the settings
to the factory default values.

Thecus N1200 Specifications

General

Brand	Thecus
Model	N1200
Category	Server
Language	English