Upgrading System Firmware
From the System menu,
choose the Firmware
Upgrade item and the
Firmware Upgrade screen
appears.
Follow the steps below to
upgrade your firmware:
1. Use the Browse
button to find the
firmware file.
2. Press Apply.
3. The beeper beeps and
the Busy LED blinks
until the upgrade is
complete.
Change Administrator Password
From the System menu,
choose the Administrator
Password item and the
Change Administrator
Password screen appears.
Enter a new password in the
New Password box and
confirm your new password in
the Confirm Password box.
Press Apply to confirm
password changes. See the
following table for a detailed
description of each item.
Change Administrator Password
Item Description
New Password Type in a new administrator password.
Confirm Password Type the new password again to confirm.
Apply Press this to save your changes.
NOTE
• The beeper only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.
To Next Page
Loading...
