Syslog Management
Generates system log to be stored locally or remotely, it also can be chose to act as
syslog server for all other devices.
These messages are stored on your NAS in: Nsync > log> messages.
Information can be obtained in two ways: locally and remotely.
Configuration with syslog server:
Configuration with syslog client and target to store locally:
Configuration with syslog client and target to store remotely:
See the following table for a detailed description of each item:
Enable/Disable syslog daemon.
If Server has been selected then associated syslog folder will be
used to store all system logs from other NAS devices which has
assigned this system for syslog server as well as syslog of this
server unit. It can be seen from associated syslog folder with files
To Next Page
Loading...
