UPnP Port Management
One of the most convent way to allow users to access required services such as FTP,
SSH, web disk and http etc. from Internet environment is setting UPnP port
management.
To set up this UPnP port forwarding feature, please be sure that the router has
“UPnP Service” Enabled. The following is an example from one of the router
manufacture with UPnP Configuration page.
After the router has enabled “UPnP Service” then you will have information come
from associated router to UPnP port management as shown in the screen shot
below.
To Next Page
Loading...
Need help?
General