Thecus N2800 - Network Services Configuration

90
LDAP Support
The LDAP is the other way to authenticate login users who has joined LDAP server,
fill in the LDAP server information and get LDAP authentication started. Please
make sure that the LDAP server has a Samba sam and a POSIX ObjectClass
account.
A description of each item follows:
LDAP Support
Item
Description
LDAP Service
Enable or Disable LDAP service.
LDAP Server IP
Input LDAP server IP address.
Base Domain
Input base domain information ex. dc=tuned, dc=com, dc=tw
Manager
Input manager’s name.
Password
Input manager’s password
Apply
Click Apply to save your changes.
Check ObjectClass
Click this checkbox to ensure LDAP server has a Samba sam and
a POSIX account or it may not work properly for LDAP client
authentication.
Network Service
Use the Network Service menu to make network service support settings.
Samba / CIFS
This option allows the Admin to Enable/Disable the Thecus IP storage to operate
with Samba / CIFS protocol. After changing the settings, the system will need to
reboot to activate.