Thecus N2800 - Page 73

73
iSCSI Target
To add iSCSI target volume, click iSCSI with associated RAID volume from its drop
down list and select the desired RAID volume.
iSCSI Target
Item
Description
Add
Click to allocate space to iSCSI target from associated RAID
volume.
Modify
Click this to modify the iSCSI Target.
Advanced
There are 3 options (iSCSI CRC/Checksum, Max
Connections, Error Recovery Level) These currently allow
the Admin to Enable/Disable the Thecus IP storage
associated with the iSCSI setting.
Delete
Click this to delete the iSCSI Target.
Allocating Space for iSCSI Volume
To allocate space for an iSCSI target on the current RAID volume, follow the steps
below:
1. Under the iSCSI Target List, select iSCSI Target then click Add.
The Create iSCSI Volume screen appears.