EasyManua.ls Logo

Thermaflow TH12 - Draining and Filling; Replacement Parts

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THERMAL INNOVATIONS (UK) LTD | THERMAFLOW® ELECTRIC COMBINATION BOILER | Tel: 0870 850 5207
8
1.6 Draining and filling
Caution this boiler works in a pressurised system which must only be drained, refilled and pressurised
by a
person competent to do so.
Note: if the pressure gauge indicates a loss of pressure that is less than 60 KPA (0.6 Bar) YOU MUST
CONTACT YOUR
INSTALLER. Unless you have been instructed by your installer on how to re-pressurise
the system correctly.
1.7 Replacement parts
If replacements parts are required, contact your Installer, Service Company or Thermal Innovations
(UK) Ltd. Please quote the name and model of your appliance. (Ref. Spare Parts List - section 1.8.1).

Table of Contents