Alarm Codes
38
Alarm Codes
Introduction
An alarm code is generated when the microprocessor senses an
abnormal condition. Alarms direct an operator or service
technician to the source of a problem.
Multiple alarms can be present at one time. All generated
alarms will be stored in memory until cleared by the operator.
Document all alarm occurrences and report them to the service
technician.
NOTE: Please refer to Profeesor Kool and the “TK Tutor
Series” App for step by step instructions and training on
Alarm types and how to clear alarms. Please refer to “TK
Alarm Codes” App for the most up to date alarms list. These
app’s can be found at the following link:
http://www.europe.thermoking.com/tools/
NOTE: Some alarms (3, 4, 74, 203, and 204) cannot be
cleared in the Alarms Menu, they must be cleared in the
Maintenance Menu or the Guarded Access Menu. Contact
your supervisor or a Thermo King dealer about clearing
those alarms.
IMPORTANT: Always record any Alarm Codes that occur -
in the order that they occur - as well as any other pertinent
information. This information is extremely valuable to
service personnel.
NOTE: In some cases alarms cannot be cleared, or cannot be
cleared after they have occurred a specified number of times.
If such is the case, these alarms must be cleared by service
personnel. These are all explained in your Alarm Codes App.
To Next Page
Loading...
Need help?
General
