Introduction
5
Introduction
There is nothing complicated about operating and maintaining
your Thermo King unit, but a few minutes studying this manual
will be time well spent.
Performing pre-trip checks and enroute inspections on a regular
basis will minimize on-the-road operating problems. A regular
maintenance program will also help to keep your unit in top
operating condition. If factory recommended procedures are
followed, you will find that you have purchased the most efficient
and dependable temperature control system available.
All service requirements, major and minor, should be handled by a
Thermo King Dealer for these very important reasons:
• They have factory trained and certified technicians
• They have genuine Thermo King replacement parts
• They are equipped with the factory recommended tools to
perform all service functions
• The warranty on your new unit is valid only when the repair
and replacement of component parts is performed by an
authorized Thermo King Dealer.
IMPORTANT: This manual is published for informational purposes
only and the information furnished herein should not be considered
as all-inclusive or meant to cover all contingencies. If more
information is required, consult your Thermo King Service
Directory for the location and telephone number of the local dealer.
Customer Satisfaction Survey
Let your voice be heard!
Your feedback will help improve our manuals. The survey is
accessible through any internet-connected device with a web browser
.
Scan the Quick Response (QR) code or click or type the web
address to complete the survey:
http://irco.az1.qualtrics.com/
SE/?SID=SV_2octfSHoUJxsk6x
To Next Page
Loading...
Need help?
General
