Thermo Scientific HyPerforma G3Pro Universal Bioreactor Controller User’s Guide | 13
Figure 1.3. Upper half of the left side panel.
The components listed are described below:
• Main Power In—Used to supply power to the unit and is either
120 VAC or 240 VAC based on facility requirements. Ensure that
adequate power is supplied to the Controller (15 A at 120 VAC or
6 A at 240 VAC).
Main Power In
Optional UPS
HMI/Monitor
Vessel Adapter Box
Vent Filter Heaters
Main Power Switch
Grounding stud
Power-indicator
Chapter 1 | G3Pro overview
To Next Page
Loading...