Thinkware D2K64D - System and Network Settings

Settings
47
6.5 Configuring the system settings
This menu allows you to configure the hardware settings that are globally applied to the system during
operation, such as the display language and screen brightness.
6.5.1 Setting the display language
Select a language to display on the screen. Follow the instructions to select a language.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Language, select the desired language. The new setting is applied automatically.
6.5.2 Adjusting the system volume
Thismenuallowsyoutoadjustthevoiceguidancevolume.Followtheinstructionstoadjustthevolume.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Volume, select 0, 1, 2, or 3. The new setting is applied automatically.
If you select 0, the voice guidance will be disabled.
6.5.3 Setting the Security LED
FollowtheinstructionstoturnonoroffthesecurityLED.
1
From the mobile viewer, tap Dash Cam Settings > System Settings.
2
From Security LED, select the desired mode. The new setting is applied automatically.
6.5.4 Setting the rear camera LED
FollowtheinstructionstoturnonorofftherearcameraLED.
1
From the mobile viewer, tap Dash Cam Settings
>
System Settings.
2
From Rear Camera LED, select Enabled or Disabled. The new setting is applied automatically.