Thinkware F70 - Connecting the Power Cable

10
Connecting and arranging the power cable
When the engine and electrical accessories are turned off, connect the
car charger.
1
2
1. Connect the car charger to the
product’s DC-IN power port and
insert the cigar jack into the vehicle’s
power socket.
2.Arrangeandxthepowercable
using the adhesive cable holders.
Refertothegureontheleftfor
the recommended locations for the
adhesive cable holders.
• The hardwiring cable (optional) must be professionally installed to the
vehicle by a trained mechanic.
• Use the authentic THINKWARE car charger. Use of third party power
cablesmaydamagetheproductandresultinelectricalreor
electrocution due to the voltage difference.
• Do not cut or modify the power cable yourself. Doing so may damage the
product or the vehicle.
• For safe driving, ensure that the cables do not obstruct driver's vision or
interfere with driving. For more information about arranging cables, visit
www.thinkware.com.
F70_QSG.indb 10F70_QSG.indb 10 2021-08-09 오후 1:08:542021-08-09 오후 1:08:54