11
Using the continuous recording features
Connect the power cable to the product’s DC-IN power port and then turn
on the vehicle’s electrical accessories or start the engine. The status LED
and the voice guide are turned on, and the continuous recording starts.
Mode Operation description Status LED
Continuous
recording
During driving, videos are recorded in 1 minute
segments and stored in the "cont_rec" folder.
On
Incident
continuous
recording
When an impact to the vehicle is detected, a video is
recorded for 20 seconds, from 10 seconds before the
detection to 10 seconds after the detection, and stored
in the "evt_rec" folder.
Flickers
swiftly
Recording manually
You can record a scene you want to capture while driving and store it as a
separatele.
To start manual recording, press the REC button. Then, manual recording
will start with the voice guide. During manual recording, the product
operates as follows.
Mode Operation description Status LED
Manual
recording
When you press the REC button, a video will be recorded
for 1 minute, from 10 seconds before to 50 seconds after
pressing the button, and stored in the "manual_rec"
folder.
Flickers
swiftly
Upgrading the rmware
Youcandownloadthelatestrmwareupgradelefrom
http://www.thinkware.com/Support/Download. For detailed information
aboutrmwareupgrades,refertotheuserguide.
YoucanalsoupdatethermwarefromthePCViewer.Anoticationpopup
willbedisplayedonthePCViewerscreenwhenanewupdatelebecomes
available.
F70_QSG.indb 11F70_QSG.indb 11 2021-08-09 오후 1:08:542021-08-09 오후 1:08:54
To Next Page
Loading...
