Using recording features
20
If parking mode settings are changed, the videos recorded with the previous settings will be deleted. To
prevent data loss, back up all parking mode videos before changing parking mode settings.
You cannot use Motion Detection, Time Lapse, or Energy Saving at the same time.
3.7 Using the Super Night Vision
With the Super Night Vision feature, you can record videos that are much brighter than those recorded
without this feature. This feature is enabled by real-time image signal processing (ISP) that improves the
video brightness. This feature is available in the continuous recording and parking modes and is only
available on the front camera.
1
From the mobile viewer, tap Dash Cam Settings
>
Record Settings.
2
From Super Night Vision, select the desired recording mode to use the Super Night Vision feature. The
new setting is applied automatically.
3.8 Using the road safety features
The road safety features include a safety camera alert system, a lane departure warning system (LDWS),
a lane departure warning system speed (LDWS Speed), a forward-collision warning system (FCWS), a low
speed forward collision warning system (low-speed FCWS), and a front vehicle departure warning (FVDW).
Safety feature Description
LDWS
(Lane Departure Warning)
Detects the lane departure via the real-time video and warns the driver
.
LDWS Speed
Detects lane departure and warns the driver when the speed of the vehicle goes
over the speed selected in the settings.
FCWS
(Forward Collision Warning)
Detects forward collision threats via the real-time video and warns the driver when
the vehicle is moving at 40 km/h or above.
Low Speed FCWS
Detects forward collision threats via real-time video and warns the driver when the
vehicle is moving at 10-30 km/h.
FVDW
(Front Vehicle Departure
W
arning)
Detects the departure of another vehicle that was previously stationary in front of the
vehicle and notifies the driver after four seconds.
• Road safety features are performed differently depending on the set speed and sensitivity of the features.
• To use and manage the road safety features, tap Dash Cam settings
>
Road Safety Settings on the mobile
viewer. For more information about road safety features settings, refer to "7.4 Setting road safety features"
on page 29.
To Next Page
Loading...
