Thinkware U1000 - Installing the Dash Cam; Mounting and Angle Adjustment

9
English
Installing the product
Select an installation
location that can record the
entire view in front of the
vehicle without obstructing
the driver’s vision. Ensure
that the front camera lens is
located in the center of the
windshield.
1.Refertotheguresbelowtoinstallthecameratothewindshield.
4
1
2
3
2. Remove the product from the mount, and then push the mount against
thewindshieldtoxitrmly.
3. Reattach the product to the mount, and then adjust the camera angle.
The product may fall and be damaged during vehicle operation if it is not
rmlyxedtothemount.
•Toconrmthecameraangle,recordavideoafterinstallationandcheck
the video using the mobile viewer or the PC viewer. If necessary, adjust
the camera angle again.
•If you need to remove the mount from the windshield to alter the
installationlocation,becarefulnottodamagethewindshield’slmcoat.