Thinkware U1000 - Connecting the Power Cable; Power Cable Setup

10
Connecting and arranging the power cable
When the engine and electrical accessories are turned off, connect the
car charger.
2
1
1. Connect the car charger to the
product’s DC-IN power port and
insert the cigar jack into the vehicle’s
power socket.
2.Arrangeandxthepowercable
using the adhesive cable holders.
Refertothegureontheleftfor
the recommended locations for the
adhesive cable holders.
•The hardwiring cable (optional) must be professionally installed to the
vehicle by a trained mechanic.
•Use the authentic THINKWARE car charger. Use of third party power
cablesmaydamagetheproductandresultinelectricalreor
electrocution due to the voltage difference.
•Do not cut or modify the power cable yourself. Doing so may damage the
product or the vehicle.
•For safe driving, arrange the cables to prevent the driver's vision from
being obstructed or interfering with driving. For more information about
arranging cables, visit www.thinkware.com.