13
Basic Operations
02
2-5-1. Motion Detection Recording
The dash cam is equipped with motion detector which is used to detect motion that initiates video re-
cording while the vehicle is parked.
When the dash cam detects motion while parked, it will immediately store the previous 10 seconds
prior to the activation of motion detection start recording video for the next 10 seconds.
- The 20-second motion detection recording is then saved on the MicroSD card under the folder named
"motion_rec".
2-5-2. Parking Incident Recording
When the dash cam detects impact while parked, it will imme-
diately store the 10 seconds prior and after the impact.
- The 20-second impact recording is saved on the MicroSD
card under the "parking_rec" folder.
2-5. Recording Videos While Parked (Optional Accessory)
This feature is available only when the dash cam has been hardwired directly to the vehicle battery.
Separate purchase for the hardwiring cable accessory and professional installation is required.
The device can record up to 1 minute for continuous impacts in the case of multiple collisions.
Cautions
To Next Page
Loading...
