6
1-4-2. Installing a MicroSD Card
Do not apply excessive force on the MicroSD card or attempt to insert it in the wrong direction as it may
cause damage to the MicroSD card and the card slot.
Inserting the memory card
Insert the MicroSD card into the
slot with the metal contacts facing
towards the back of the device
and push until it locks into place.
Removing the memory card
Gently apply force on the MicroSD
card until it is ejected from the
slot.
MicroSD card
1-4. Inserting a Memory Card
1-4-1. About Memory Cards
MicroSD card must be used with a storage capacity of 8GB Class 10 or higher.
UHS MicroSD card must be used with a storage capacity of 16GB, 32GB, or 64GB.
Device only supports MicroSD card with capacity of 8GB Class 10 or higher.
The MicroSD card should be tested for errors on a regular basis and as the memory card is a consumable
item, it should be replaced periodically.
THINKWARE shall NOT be responsible for any problems and/or damages that may occur from not using
genuine or authorized parts and accessories. It is strongly recommended that THINKWARE memory cards
are used to minimize memory card error.
Ensure that the device is completely o before removing the MicroSD card to avoid damages to the
memory card.
To prevent loss of important data, frequently copy recorded videos from MicroSD card to another storage
device such as personal computer for back up.
Cautions
To Next Page
Loading...
