Turn the [DATA CONTROL] knob to select track 1 or 2. If there already exist recordings
on the tracks, a dot appears in the lower right corner of the display.
The piano also offers options for deleting and cancelling .
If the track you want to record to appears in the display, you can start playing.
Recording starts automatically as soon as you play the first note.
Turn the [DATA CONTROL] knob until the display shows .
Press the [SONG] button. Record waiting mode will be cancelled. No changes will be
made on track 1 und 2.
To adjust the metronome tempo in record waiting mode, keep the METRONOME
button pressed while selecting the desired value by turning the rotary control
[DATA CONTROL].
During recording the metronome tempo can not be changed.
Press the [METRONOME] button. The metronome stops, but the recording continues.
If you press the [METRONOME] button again, the metronome will be switched on
again. You can also switch the metronome on and off in record waiting mode, before
the recording begins.
Cancelling recording in record waiting
mode
Changing metronome tempo in
record waiting mode
Turning off the metronome during
recording
Song recording
DP-25
25
To Next Page
Loading...
Need help?
General
