7.8 Transposing
With this function you can adjust the pitch of the claviature in semitone steps one
octave up or down.
1. Press [TRANSPOSE].
ð
The display shows the set value.
2. Use the buttons [NO] and [YES] to adjust the pitch in a range from ‘–05’ … ‘07’.
3. Press [NO] and [YES] simultaneously to reset the pitch back to factory defaults.
7.9 Resonance effect
This effect simulates the lifting of the damper in an analogue keyboard instrument.
When pressing the keys, the played notes decay more slowly.
1. Press [SHIFT] and [PEDAL RESONANCE] simultaneously to enable the Resonance
effect.
2. Press [SHIFT] and [PEDAL RESONANCE] simultaneously to disable the Resonance
effect again.
When you turn on the digital piano the resonance effect is disabled by
default.
Enabling the resonance effect disables the harmony mode. Enabling during
playing may cause a slight interruption of sound reproduction.
7.10 Digital effects
7.10.1 Reverb and Chorus
With the reverb and chorus functions you can simulate acoustic effects under dif‐
ferent environmental conditions.
1. Keep the [SHIFT] button pressed and turn on the desired effect with the piano
key [ON/OFF] in the [REVERB ] or [CHORUS] area.
2. Keep the [SHIFT] button pressed and adjust the effects depth with the piano
keys [REVERB ] or [CHORUS].
Piano key in the [REVERB] area in the [CHORUS] area
[1] Chamber Slight Chorus effect
[2] Small hall Medium Chorus effect
Switching on / off and basic operation
digital piano
22
To Next Page
Loading...
Need help?
General
