5. MIDI values
Press [DATA] to enter a MIDI value. The display shows the current setting, the
dot behind the [STYLE] display is flashing.
Keep the [SHIFT] button pressed and use the piano keys [0] … [9] in the [MIDI]
area to enter a value between 000 … 127.
6. Channel assignment
Press [CHANNEL] to assign a MIDI channel. The display shows the current set‐
ting, the dot behind the [SONG] display is flashing.
Keep the [SHIFT] button pressed and use the piano keys [0] … [9] in the [MIDI]
area to enter a channel number between 01 … 16.
7. Adjust the other channels as described.
8. Use [MIDI EDIT] to exit the Edit mode.
7.23.5 Controller assignment
1. Press [SHIFT] and [MIDI MODE] simultaneously to enter the MIDI mode.
ð
The [MIDI MODE] button LED lights.
2. Use [CTRL 1], [CTRL 2] and [CTRL 3] to select the controller for sending MIDI
data.
ð
The LED of the corresponding button flashes while the digital piano sends
MIDI data. When all data is transferred, the LED lights solid.
3. If desired, press the button again to resend the data.
4. Press [SHIFT] and [MIDI MODE] simultaneously to exit the MIDI mode.
7.24 Factory defaults
Proceed as follows to restore the factory default settings:
1. Turn off the digital piano.
2. When turning it back on again, keep the buttons [YES] and [NO] pressed.
ð
All user songs and settings are reset or deleted without further confirma‐
tion prompt. The display shows ‘---’.
Switching on / off and basic operation
digital piano
34
To Next Page
Loading...
Need help?
General
