4 Assembly instructions
Unpack and carefully check that there is no transportation damage before using the
unit. Keep the equipment packaging. To fully protect the device against vibration,
dust and moisture during transportation or storage use the original packaging or
your own packaging material suitable for transport or storage, respectively.
Set up the device in the desired location.
The unit is powered by the included 12 V power supply. Make sure that the device is
turned off before you connect it to the power supply or disconnect it.
Turn the volume knob counter-clockwise to minimum before connecting the digital
piano to the power supply or to other devices. This is to protect the speakers from
damage.
Connect the cable from the power supply outlet to the input socket [12V] on the rear
panel of the piano. Plug the plug of the power cord into a properly wired and
earthed mains wall outlet.
Operating voltage supply
Assembly instructions
digital piano
10
To Next Page
Loading...
Need help?
General
