Thomas NOMARK 65/99 - Offset Chuck Attachment

Offset chuck attachment
190.012 Offset chuck attachment
The Angled Extension Arm
allows the welding of studs
into corners and against
upstands.
190.205 CD tester bending bar
190.210 Bending bar nozzle Ø 3 mm
190.216 Bending bar nozzle Ø 4 mm
190.222 Bending bar nozzle Ø 5 mm
190.228 Bending bar nozzle Ø 6 mm
190.234 Bending bar nozzle Ø 8 mm
64