Thomas NOMARK 65/99 - ISO Kit Accessories for C1; G1; Chuck; Gun Face Plate; Foot Plate + Nozzle

ISO Kit Accessories for C1 / G1
(for welding longs CD pins > 100 mm)
1. CHUCK
190.104 Chuck CD Ø 3 mm
190.108 Chuck CD Ø 4 mm
190.101 Chuck CD Ø 2.5 mm
2. Gun face plate
104.127 Face Plate
3. Foot plate + Nozzle
1. Leg (*)
190.201 8 x 170 mm
190.202 8 x 220 mm
190.203 8 x 300 mm
190.204 8 x 400 mm
190.205 8 x 500 mm
2. Foot washer
190.210
3. Foot screw
M 5 x 25 (or 30 mm)
190.215
4. Foot plate for Ø 35 mm nozzle 190.240
5 Ø35mm Nozzle 190.241
6. Teflon ring 190.242
(*) Leg length >= CD pins length. Sold individually. If you need a pair, be sure to order two
71