THOMSON DTH8040 - The Buttons on the Front

Connections and initial set up
14
The buttons on the front
ON/STANDBY - To switch your DVD
recorder on or off.
STOP - To stop play (press once) or to
stop recording in progress using the
Channels menu (press twice).
PLAY / PAUSE
- To play a disc placed in the disc tray (10)
of the DVD recorder.
- Pause during playback (audio CD or
mp3) or pause on an image (DVD).
G
REV / FWD
F
Fast forward or reverse (page 32).
RECORD - To start recording a TV
programme (the red indicator lights up)
and if necessary to adjust recording time
by pressing repeatedly. Each press on the
RECORD key extends recording time by
30 minutes.
OPEN/CLOSE - To open and close the
disc tray.
AV - To select the audiovisual sources
(channels or devices connected to the AV
sockets):
PR 1 ,2 ,3 - Channel 1, 2, 3.
AV 1 - Device connected on AV1 (TV set).
AV 2 - Device connected on AV2 (satellite
receiver, decoder, …).
AV 3 - Front AUDIO/VIDEO sockets.
AV 4 - Rear AV sockets (S-VIDEO or
AUDIO/VIDEO.
PR- / PR+ / I
G
SKIP
F
I
To change channels (page 19).
Skips forward or backward a chapter
(page 33).
Display panel - Displays your DVD
recorder’s modes of operation (page 15).
Adjusting the brightness (page 52)
Disc tray.
1
2
3
4
5
6
7
8
9
10
0h30  1h00  1h30  2h00  2h30  3h00
21 3 5 6 7
10
9
84
2_DTH8040_42_en.qxd 7/07/04 9:31 Page 14