11
You can use PARENTAL CONTROL to create viewing restrictions on your receiver. First create
your own Personal Identification Number (PIN) as shown in the Advanced Setup section of this
guide. You can now create censorship levels or Lock out channels completely.
Press [MENU], select PARENTAL CONTROL and press [OK].
Now enter your PIN. The menu will appear.
Censorship
If the censorship level does not match the censorship rating
of the program, access will be denied, the user is prompted
for the PIN before access is granted.
Press to set the censorship level to OFF, 6, 12, 15, 18 or
BLOCK (for total block).
Lock services
From the PARENTAL CONTROL menu, select LOCK/UNLOCK
SERVICES and press [OK].
To Lock/Unlock services scroll through the list of services
with
//
and Lock/Unlock the highlighted service with
[OK].
To exit menu press [QUIT].
To view a locked channel the PIN must be entered. Once
entered, all locked channels will be unlocked until the
receiver is next in standby.
Should any censored or locked channel be selected using
the TIMER PROGRAMMING function, you must enter the
PIN before the event is stored.
Should any channel be censored or locked after the TIMER
PROGRAMMING function has been set, you will be
prompted for the PIN before access is granted. Entering an
incorrect PIN will only allow the status of the channel to be
displayed upon a blank screen.
PPaarreennttaall ccoonnttrroollss
Use
To Next Page
Loading...
