7
EN
Organising channels
1. Press the DIGITAL button on the remote control.
2. Press the MENU button to display the OVERVIEW menu. Select Installation and
press
OK to confi rm. Select the option Organiser from the Installation menu and
press
OK to confi rm.
Note: The Organiser option does not appear if you have selected an AV programme.
3. Press the yellow button on the remote control to access the sort functions. Then:
- Press the red button to sort the channels in alphabetical order
- Press the green button to sort the channels by type: unencrypted channels, then
encrypted channels. Encrypted channels are fl agged by a symbol.
- Press the yellow button to sort the channels by frequency.
- Press the blue button to sort the channels by order number.
- Press the purple button to sort the channels manually. Then follow the instructions on
the screen.
Press the
EXIT button as many times as required to exit the menus.
Confi guring the digital receiver
You can confi gure your receiver according to your own preferences. To do this, press
the
DIGITAL button on the remote control. Press the MENU button to display the
OVERVIEW menu. Select Installation and press OK. Select the Installation option
from the
Installation menu and press OK. Select options and press OK to confi rm. You
can then set certain parameters.
Language
You can set your preferences in terms of the language you want dialogue and subtitles to
appear in.
1. Select language from the options menu and press OK.
2. Select language 1 under audio preference and choose a language from the list
using the
buttons.
3. You can set a second preference. You do this by selecting language 2 and choosing a
language from the list using the
buttons.
4. Under subtitles preference, select language 1 and choose a language from the list
using the
buttons.
5. You can set a second preference. You do this by selecting language 2 and choosing a
language from the list using the
buttons.
Press the
EXIT button to return to the options menu.
Settings
You can set certain parameters for the digital receiver.
1. Select settings from the options menu and press OK. The connection menu
appears.
2. If you want to connect a digital audio amplifi er to the AUDIO DIGITAL OUT
socket on the side of the TV set, select
SPDIF output and choose the option ON
using the
buttons.
3. Select CVBS standard. Using the buttons, choose from the list the standard
corresponding to the type of signal transmitted by the video recorder.
Important: Do not select the option NTSC.
4. Select MHEG-5 and enable/disable the function using the buttons.
Press the
EXIT button to return to the options menu.
Digital reception - Other functions
language
audio preference
language 1 english
language 2 english
subtitles preference
language 1 english
language 2 english
connection
SPDIF output OFF
CVBS standard PAL
MHEG-5 OFF
options
language
settings
time
upgrade
130-EN-DVBT.indd 7130-EN-DVBT.indd 7 26/01/06 14:19:0626/01/06 14:19:06
To Next Page