24
EN
Other functions
The main menu offers other functions, which are described below. Select an option and press
OK.
Lock
This function can be used to control access to fi les that can be read by this reader. Press OK
to display the relevant menu.
Lock Player. This is used to lock the reader.
Select
Lock Player from the Lock menu using the buttons and press OK to
confi rm. Enter a 4-digit code in the screen that appears using the numeric buttons on
the remote control, then press
OK to confi rm. Enter your code again to confi rm it, then
press
OK.
Note: Choose a code that is easy for you to remember or make a note of it.
When the reader is locked, you need to enter the code to access the options in the
Lock menu.
Unlock Player. This is used to unlock the reader.
Select
Lock from the main menu using the buttons and press OK to confi rm.
Enter your code in the screen that appears using the numeric buttons, then press
OK
to confi rm. The
Lock menu appears. Select Unlock Player and press OK to confi rm.
The reader is unlocked.
Change Password. This is used to change your password.
Select
Change Password from the Lock menu using the buttons and press
OK to confi rm. Enter a new 4-digit code and press OK to confi rm. Enter your new
code again to confi rm it, then press
OK.
Ratings Limits. Select Ratings Limits from the Lock menu using the
buttons and press
OK to confi rm. You can then defi ne the conditions for accessing
unrated titles (which don't contain any parental control information).
Press OK. Select Free Access if you don't want to set any limits, or Password
Required if you want to allow the fi les to be read only after a password has been
entered.
These limits are only enabled if you have locked the reader.
System Test. If requested by your reseller, you can select the System Test option to
access certain information.
Display
This can be used to enable the On-Screen Displays function. Press OK. The On-
Screen Displays
option appears. Press OK. Enable or disable the function by pressing
OK.
Sound
This can be used to enable the Sound Logic function. You can use this function to control
the different sound levels via dynamic compression. It improves the quality of the sound track
at a low volume and quietens the loudest sounds. Press
OK. The Sound Logic option
appears. Enable or disable the function by pressing
OK.
Languages
This can be used to select the language which the menus for the memory card reader are
displayed in. Press
OK. The Player Menus option appears. Press OK. Select a language
from the list using the
buttons and press OK to confi rm.
Advanced functions
130-EN-DVBT.indd 24130-EN-DVBT.indd 24 26/01/06 14:19:1526/01/06 14:19:15
To Next Page
Loading...
