20
Advanced functions
EN
Locking a channel or AV programme
1. Select the Select channel option from the Parental control menu. Use the
or numeric buttons to select the channel to be locked. Use the buttons or
press the
AV button to access the AV programmes.
2. Check the box under the Lock channel option by pressing OK.
Note: This function is only available if a code has been defi ned.
To unlock the channel or AV programme, go to the Parental control menu by entering
your code, select the
Lock channel option and uncheck the box by pressing OK. Press
EXIT to close the menu.
Locking the buttons on the TV set
Select the Lock front panel option from the Parental control menu and check the
box by pressing
OK.
Notes:
- This function is only available if a code has been defi ned.
- The remote control is needed to be able to use the television.
To cancel the lock, go to the Parental control menu by entering your code, select the
Lock front panel option and uncheck the box by pressing OK. Press EXIT to close the
menu.
Locking the Time menu
Select the Lock TIME option from the Parental control menu and check the box by
pressing
OK.
Notes:
- This function is only available if a code has been defi ned.
- When this function is active you need to enter your PIN code to be able to access the
Time
menu.
To cancel the lock function, enter your PIN code to access the Parental control menu,
select the
Lock TIME option and uncheck the box by pressing OK. Press EXIT to close
the menu.
Locking the Installation menu
Select the Lock INSTALLATION option from the Parental control menu and
check the box by pressing
OK.
Notes:
- This function is only available if a code has been defi ned.
- When this function is active you need to enter your PIN code to be able to access the
Installation menu.
To cancel the lock function, enter your PIN code to access the Parental control menu,
select the
Lock INSTALLATION option and uncheck the box by pressing OK. Press
EXIT to close the menu.
Operation (TV mode)
• To watch a channel or AV programme which is locked, try accessing it and follow the
procedure on the screen. The lock will be applied again when you put the television in
standby.
In the list of programmes, channels and/or AV programmes which are temporarily
unlocked are indicated by an open padlock.
• If you have forgotten your PIN code you can cancel it:
Put your TV set into standby mode, then press the
VOL É button on the TV set and the
EXIT button on the remote control simultaneously for fi ve seconds. This procedure is
possible, even if you have locked the buttons on the TV set.
Parental control
Return
Select channel 01 BBC1
Lock channel R
Lock front panel R
Lock TIME £
Lock INSTALLATION £
PIN code Ñ _ _ _ _
Defi ne a PIN code by using the digit keys.
130-EN-DVBT.indd 20130-EN-DVBT.indd 20 26/01/06 14:19:1326/01/06 14:19:13
To Next Page
Loading...
