17
Chapter title
EN
Advanced functions
In PC mode you can access a number of specifi c functions:
Auto-adjustment: this option allows you to automatically adjust the following functions:
Phase, Clock, Vertical position and Horizontal position. Press OK until the
message
Running appears. Once the setting is implemented the message Done appears.
Phase, Clock: adjust these settings as required using the buttons in order to
enhance picture quality.
Vertical position: use the buttons to move the picture vertically on the screen.
Horizontal position: use the buttons to move the picture horizontally on the
screen.
Other settings
Note: This menu is only available for TV channels and AV programmes.
Select the Other settings option from the Picture menu and press OK.The Other
settings menu appears with the following options:
Film mode: detects that the programme being broadcast is a fi lm and enhances picture
quality. Select an option from the list using the
buttons.
Notes:
- The
Advanced option is selected by default.
- This function is only available for certain audio-visual sources.
NTSC tint: is used to adjust the picture’s tint. Adjust these settings as required using the
buttons.
Note: This function is only available for NTSC audio-visual sources.
Automatic format: automatically applies the appropriate format to the picture. Check
the box by pressing
OK to enable this function.
Note: This function is only available for certain audio-visual sources.
Press EXIT to close the menu. To return to the Picture menu, select Return and press
OK to confi rm.
Picture
Return
Brightness Ñ
Colour
Contrast
Tone Neutral
Auto-adjustment ...
Phase
Clock
Vertical position
Horizontal position
To Next Page
Loading...
