THORENS TD 166 MKII User Manual

chosen, the stylus
tip will lie within
the sighting slits.
After the correct
stylus position has
been achieved, the
mounting screws
are tightened.
Thereafter, the
pickup cartridge
should be compared
with the edge of the
arm on the handle
slide as shown in
Figure 22. If the
two are not parallel,
a misalignment of
the cartridge is
indicated.
7. Using a pair of
tweezers, push the
contacts of the tone
arm leads onto the
connection pinns of
the cartridge. The
leads are color
coded in
compliance with
international
standards, as
follows:
White - Left
channel
signal lead
Blue - Left
channel
shield
These leads are also
to be used when a
monophonic pickup

THORENS TD 166 MKII Specifications

General

Brand	THORENS
Model	TD 166 MKII
Category	Turntable
Language	English