www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
1. Top lid 16. Laser power switch
2. Hand valve Pneumatic Fitting 17. Main power switch
3. Auto focus sensor 18. Ethernet port
4. Left-up side door 19. U-disk connection port(USB)
5. Left side door 20. PC connection port(USB)
6. X-axis 21. Right side door
7. Laser heads 22. Right-up side door
8. Front door 23. Indicate light
9. Honey comb table 24. Power supply socket
10. Y-axis 25. Laser tube cover
11. Front up door 26. Exhaust hose
12. Flap protection sensor 27. Blow air port
13. Control panel 28. Water in and water out
14. Emergency stop switch 29. Manufacturer’s label
15. LED lamp
1. Top lid
If the Top lid is opened, no data is processed. When the protection cover is opened
during working, the motion system is stopped and the laser source is turned off.
During processing of commands the protection cover must only be opened after
pressing the “Pause “button.
2. Hand valve Pneumatic Fitting
It’s used for adjust that blow air amount.
3. Auto focus sensor
Used for the automatic focusing of the work table.
4. Left-up side door
Open this door for cleaning the second reflective mirror or align that laser beam
5. Left side door
To Next Page
Loading...
