Thunder T6 User Manual

25
to charge. So the optimal charge current will be 1/10
of the capacity. Pb batteries must not be charged
rapidly. Always follow the instruction is supplied by the
manufacturer of battery.
When you are willing to alter the parameter value in
the program, press
Start/Enter
key to make it blink
then change the value with
INC
or
DEC
key. The value
will be stored by pressing
Start/Enter
key once.
Charging Pb battery
Set up the charge current on the left and the nominal
voltage of the battery on the right. The charge current
ranges from 0.1 to 5.0A
and the voltage should be
matched with the battery
being charged.
Start the charge process
by pressing
Start/Enter
k e y f o r m o r e t h a n 3
seconds.
The screen displays the
state of charging process.
To stop charging forcibly,
press
Batt type/Stop
key once.
T h e a u d i b l e s o u n d
indicates you at the end of
process.
Pb CHARGE
4.0A 12.0V(6P)
Display
- +
DEC INC
Display
- +
DEC INC
Batt type
Stop
Start
Enter
'>3 seconds'
Pb-6 4.0A 12.59V
CHG 022:43 00682
Display
Display
battery
type
elapsed
time
charge
current
battery
voltage
charged
capacity

Thunder T6 Specifications

General

Brand	Thunder
Model	T6
Category	Battery Charger
Language	English