Thunder T6 User Manual

28
S e t t i n g u p d i s c h a r g e
current and nal voltage.
Setting up the sequence
of charge and discharge,
and the cycling number.
Saving the data.
Load Data program
This program calls back the data that was stored at
“Save Data” program.
To load the data, press
Start/Enter
key once to
blink the data number eld and select the number using
INC or DEC
key then press
Start/Enter
key for
more than 3 seconds.
NiMH CYCLE *
DCHG>CHG 3
Display
Display
- +
DEC INC
- +
DEC INC
Start
Enter
'>3 seconds'
Save
...
Display
Display
PROGRAM SELECT
LOAD DATA
Display
Display
Start
Enter
NiMH DISCHARGE *
1.0A 11.0V
Display
- +
DEC INC
Display
- +
DEC INC
DEC INC

Thunder T6 Specifications

General

Brand	Thunder
Model	T6
Category	Battery Charger
Language	English