individual voltages of each cell in the battery pack. When
connect the cable to the port on the right side of the
charger the program shows the voltage of each cells for
maximum 6 cells in sequence. To utilize this feature, the
battery pack must have output connector that linked to
each cells.
Warning and error messages
It incorporates various functions of protective and
monitoring system to verify functions and the state of its
electronics. In any case of occurring error, the screen
displays the cause of error that is self-explanatory with
audible sound.
The output is connected
to a battery with incorrect
polarity.
Th i s wi ll be d is p la ye d
i n c a s e o f d e t e c t i n g
a n i n t e r r u p t i o n o f t h e
connection between battery
and output or voluntarily disconnecting the charge lead
during the operation of charge or discharge on output.
There was a short-circuit
at OUTPUT. Please check
the charging leads.
REVERSE POLARITY
Display
Display
CONNECTION BREAK
Display
Display
SHORT ERR
Display
Display
To Next Page
Loading...
Need help?
General
