Thunder T6 User Manual

1
Thank you for purchasing the 6Cell multi Charger. You
rapid charger/discharger with a built-in balance,
computerized with a high performance
and specialized operating software.
Please read this entire operating manual completely
and attentively as it contains a wide variety of specific
programming and safety information.
Specifications
Operating voltage range: DC 11.0—15.0 Volt
Circuit power: max. 50W for charging
max.5W for discharging
Charge/Discharge current range:0.1—6.0A/0.1—1.0A
Current drain for balancing Li-po
:
300mAh/cell
NiCd/NiMH battery cell count: 1—15Cells
Lithium battery cell count:
Pb battery voltage: 2 to 20V
Special features
Optimized operating software
When charging or discharging, it has an “AUTO”
function that sets the feeding current automatically.
Especially for Lithium batteries, it can prevent the over-
charging can lead to an explosion by users fault. Every
program in the unit is controlled with mutual links and
communication for
every possible error so it introduces a
maximum safety. These can be set at users option.
Dual input power
It employs the circuit that maximum output power of
50W for charging. As a result, it can charge up to 15
1—6Series
get a
which is
microprocessor

Thunder T6 Specifications

General

Brand	Thunder
Model	T6
Category	Battery Charger
Language	English

Summary

Product Specifications

Operating Parameters

Details voltage range, circuit power, and current limits for charging/discharging.

Battery Compatibility

Lists supported battery types and cell counts (NiCd, NiMH, Li-ion, Pb).

Key Features and Software

Optimized Software & Auto Functions

Features auto current setting, Lithium battery safety, and error handling for maximum safety.

Dual Input Power

Utilizes a circuit for maximum output power of 50W for charging.

Advanced Lithium Battery Management

Includes individual cell balancing, support for Lilon/LiPo/LiFe, and Fast/Storage modes.

Safety and Control Limits

Covers Delta-peak sensitivity, capacity, temperature, time limits, and input power monitoring.

Safety Guidelines and Warnings

General Safety Precautions

Covers unsupervised operation, environmental factors, input power, and surface placement.

Battery Handling and Compatibility

Warns about flammable materials, data accuracy, and lists unsupported battery types.

Operational Safety Procedures

Details short-circuit prevention, single battery connection, and pre-charge checks.

General Operating Procedures

Charging Process Overview

Explains charging energy, quantity, current, and connection requirements.

Discharging Process Overview

Covers discharge purpose, voltage settings, Lithium deep-discharge warning, and memory effect.

Program Configuration

Program Flow Chart

Visual representation of the charger's program selection and execution sequence.

Initial Parameter Setup

Guides users through setting voltage types, cell counts, and sensitivity parameters.

Lithium Battery Programs

Details setup for Lithium battery charging, fast charging, storage, and discharging.

NiMH/NiCd Battery Programs

Covers charging, discharging, and cyclic operations for NiMH/NiCd batteries.

Pb Battery Programs

Details charging and discharging procedures specific to Pb (lead-acid) batteries.

Data Management and Information Display

Save and Load Data Function

Allows storing and recalling up to 5 battery data sets for convenience.

Real-time Process Information

Shows status like capacity, timers, temperature, and individual cell voltages during operation.

Error Messages and Troubleshooting

Common Error Indicators

Explains messages like Reverse Polarity, Connection Break, and Short Circuit errors.

System and Battery Errors

Covers input voltage, cell voltage, connection, temperature, and control failure errors.