34
vd12-14-de-171016
3 Installation
3.1 Notes for Installation
Unauthorized modifications or conversions of the instrument are
not allowed! Before connecting to mains power make sure that the
supply voltage range stated on the type label complies with your
local mains voltage.
Installation location: Indoor
For not fully air conditioned open buildings and operation rooms:
Temperature: +5°C ... +50°C
Rel. Humidity: 5 - 85%, not condensing
Air pressure: 860 - 1060 hPa (mbar)
3.2 Mains Connection
The mains connector must be plugged into a mains socket with
protective earth conductor. Use three-pole cables, only, with
properly wired earth conductor.
Mains connector:
5: Mains switch
6: Socket for mains cable
To Next Page
Loading...
