20
Protective covers are available to prevent damage to the cassettes.
To install the protective covers:
Step 1: Remove the cassette from the Bill Acceptor.
Step 2: Place the protective cover so the “CashCode” logo is away
from the door opening knob.
Door opening knob
Step 3: To remove the protective cover from the Cassette, pull from
the side, not from the ends.
To store the protective cover while the cassette is installed on the Bill
Acceptor:
Step 1: Place the protective cover so the “CashCode” logo is away
from the cassette catch clips.
Cassette catch
clips
CashCode Bill Acceptors
To Next Page
Loading...
