TigerStop TigerSPC - 14 I Ncremental M Easurement

14
Settings
Incremental Measurement
Turns on TigerSPC’s incremental measurement mode. Allows for setting a second Zero point to make 2
measurements in 1 length.
P
*
Press to scroll through the options.
Options
• ON - Enables incremental measurement mode.
• OFF - Disables incremental measurement mode.
Using Incremental Measurement Mode
1. Measure a part normally.
2. Press at the same time to toggle to incremental mode. TigerSPC displays 0.
• The screen displays when in Incremental Measurement mode.
3. Make a second measurement and record the value.
4. Press to return to the original calibration.
Access Reference Value
Creates a quick toggle from the measurement screen to the Reference value.
P
*
Press to scroll through the options.
Options
• ON - Enables a quick toggle to access the reference.
• OFF - Turns o the reference quick toggle.
Using the Reference Quick Toggle
1. At the measurement screen, press
P
at the same time.
• TigerSPC will display the Reference value.
2. Press to select a number.
3. Press to change the selected number.
4. Press
P
to return to the measurement screen.