To Next PageTo Next PageWhat to do if Timberk SWHFS130V Water Heater heating indicator light lights up but water is not heated?
If the heating indicator light is on, but the water isn't heating, it could be due to a broken temperature adjustment device, insufficient heating time, or a broken heating element. Allow more time for heating, or contact a Timberk service center for assistance.
What to do if Timberk Water Heater water doesn't flow from the hot water discharge cock?
If water isn't flowing from the hot water discharge, the water feed might be cut off, the water pressure could be too low, or the water supply exhaust valve might be closed. Wait for the water supply to restore, switch on the water heater again when normal water pressure restores, or open the water supply exhaust valve.
What does E1 mean on Timberk SWHFS130V Water Heater?
The error code E1 on your Timberk water heater indicates dry heating. Check to ensure there is water in the water heater.
Why is my Timberk SWHFS130V leaking?
If your Timberk water heater is leaking, it could be due to a broken seal at the pipe connection point. Try replacing the joint seal.
What to do if Timberk Water Heater water temperature is too high?
If the water temperature from your Timberk water heater is too high, it indicates that the water temperature control system is damaged. Contact a Timberk service center for assistance.
How to fix Timberk SWHFS130V Water Heater when the heating indicator light doesn't light up and water is not heated?
If the heating indicator light doesn't illuminate and the water isn't heating, the temperature adjustment device or limiter might be broken, or the temperature limiter was actuated or not switched on. Try switching on the temperature switch following the activation instructions. Contact a Timberk service center if needed.
Why is water flowing from the case of my Timberk SWHFS130V?
If water is flowing from the case of your Timberk water heater, it could be due to the breaking of the internal tank (corrosion) or a broken seal at the heating element connection point. Contact a Timberk service center for assistance.
General| Power | 1.5 kW |
|---|---|
| Thermostat | Yes |
| Internal Tank Coating | Enamel |
| Protection Class | IPX4 |
| Type | Storage |
| Capacity | 30 L |
| Mounting | Vertical |
| Heating Element Type | Dry heating element |
Read manual carefully for safety, operation, and maintenance recommendations.
Essential safety measures for electrical appliance operation, installation, and power connection.
Details on DROP, SHOCK, and HOT Defense systems for leak, shock, and overheating protection.
Physical dimensions for FS2, FS6, and FE2 series water heaters.
Physical dimensions for FS1, FS5, and FE1 series water heaters.
Identification of key components for FS2, FS6, and FE2 series water heaters.
Identification of key components for FS1, FS5, and FE1 series water heaters.
List of items included in the water heater package for FS5/FS6 models.
Guidelines for choosing a suitable installation location and mounting position for the water heater.
Instructions for mounting the water heater for a single hot water outlet.
Instructions for mounting the water heater for multiple hot water outlets.
Requirements for wall mounting, anchor bolts, and power outlet placement.
Procedure for connecting the water heater to the main water supply, including pressure considerations.
Details on connecting pipes, relief valve, and consumption points.
Guidelines for connecting to the 230V main, outlet requirements, and GFCI plug.
Explanation of controls and indicators for the FS2 series control panel.
Explanation of controls and indicators for the FS1 series control panel.
Instructions for testing the GFCI safety device and interpreting its indicator lights.
Detailed functions of the control panel for FE1/FE2 series water heaters.
Detailed functions of the control panel for FS5/FS6 series water heaters.
Guide to using the remote control buttons for FS5/FS6 series water heaters.
Instructions for installing batteries and important handling precautions for the remote control.
Step-by-step guide for initiating, operating, and shutting down the water heater.
Step-by-step guide for initiating, operating, and shutting down the water heater.
Steps for safely switching on the water heater and filling the tank.
How to set and adjust the desired water temperature within the specified range.
Choosing between 'energy save', 'normal heat', and 'express heat' power modes.
Instructions for setting the clock, timer functions, and activating night heating mode.
How to lock/unlock the control panel and procedures for safely switching off the unit.
Recommended periodic cleaning, anode check, and relief valve inspection.
Table of common problems, their causes, and recommended troubleshooting methods.
List of error codes for FS5/FS6 models and their corresponding troubleshooting actions.
Electrical schematic for FS1 and FS2 series water heaters.
Electrical schematic for FS5, FS6, FE1, and FE2 series water heaters.
Information on proper disposal of the water heater at the end of its service life.
