TW 160PH
SERVICE INSTRUCTIONS
16 / 51
C190-0013 11.04.2019
Product name: Copper Ease.
Copper Ease contains no hazardous ingredients at or above regulatory disclosure limits, however, safety
precautions should be taken when handling (use of oil-resistant gloves and saftey glasses are recommended -
respiratory protection is not required). Avoid direct contact with the substance and store in a cool, well
ventilated area avoiding sources of ignition, strong oxidising agents and strong acids. Dispose of as normal
industial waste (be aware of the possible existance of regional or national regulations regarding disposal), do
not discharge into drains or rivers.
In case of fire: in combustion the product emits toxic fumes, extinguish with alcohol or polymer foam, carbon
dioxide or dry chemical powder. Wear self-contained breathing apparatus and protective clothing to prevent
contact with skin and eyes.
FIRST AID
Skin contact: there may be mild irritation at the site of contact, wash immediately with plenty of soap and water.
Eye contact: there may be irritation and redness, bathe the eye with running water for 15 minutes.
Ingestion: there may be irritation of the throat, do not induce vomiting, wash out mouth with water.
A safety data sheet for this product can be obtained by writing to the manufacturer at the
following address: Comma Oil and Chemicals Ltd., Deering Way, Gravesend, Kent DA12 2QX. Tel: 01474
564311, Fax: 01474 333000.
COPPER EASE SAFETY INFORMATION
To Next Page
Loading...
